|
The
Onsite Process
Our trained upholsterer /technician
will arrive onsite at your practice with a mobile
air compressor, staple gun, foam
padding and vinyl material to carry
out the following procedure:
• Carefully disassemble your
patient chair/s and remove all existing
upholstery down to the bare frame –
this is important to ensure any
contaminated padding is removed
along with the top vinyl
• Inspect the frame and tighten all
joints where necessary
• Replace all old foam with high
resilience anti-combustion foam
• Finally, re-upholster your chair in a hydrophobic,
anti-microbial vinyl fabric. We
have large selection of medical
grade vinyl
colours to choose from. |